(300mm) 12" Digger Bucket 2.0 to 3.2t diggers, made by Digbits

At DIGBITS, we understand that getting the right buckets, and using
them correctly is vital. Having the right tool for the job maximises
efficiency and prevents damage. There are a few general bucket rules
which apply to all excavators:

1. Cycle Times:
   
   Bear in mind that the fastest cycle times (i.e. the time taken to dig a
   full bucket load, tip it into a truck/skip/hopper and return to the dig
   position) are NOT necessarily achieved with the widest or largest
   capacity bucket. This is especially true in harder ground conditions.
2. Stability:
   
   It is not generally advisable to exceed the maximum bucket width
   declared in your machines specifications. Any modifications to the
   machine work equipment – boom or dipper extensions, quick-hitches etc. –
   will tend to de-rate the overall machine stability.
3. Terrain & Ground Conditions:
   If
   your work takes you to places where there are cross gradients and steep
   slopes, or to sites where ground bearing pressure is low and the
   machine may sink, you do not want to look at the largest capacity or
   heaviest buckets.
4. Narrow Digging:
   On most
   machines, the limiting factor for bucket width will be the width of the
   bucket linkage and pins. It is possible to build taller narrower
   buckets, though these may have a reduced breakout capability, the
   potential for collisions with parts of the excavator with normal buckets
   would not reach, and cannot dig deeper than the bucket itself.
5. Digging Buckets:
   
   Keep the teeth in good condition, and try to catch any wear before it
   becomes critical (see Repairs) to avoid expense. Do not be tempted to
   use for heavy duty, demolition, rock or quarry applications – sadly most
   customers who buy our XHD buckets have already scrapped a perfectly
   good GP or HD buckets on these jobs.
6. Ditching Buckets:
   
   These are designed for re-handling and levelling of soil, so expect
   them to dig compact or rocky ground. The width of these buckets, and
   their lighter construction means it is worth avoiding catching the outer
   edges on objects which are firmly fixed into the ground (e.g. large
   rocks or manholes) as they will bend. We are often asked why we don’t
   build them heavier – the answer is that you would end up putting a
   ‘corskcrew’ type bend into your dipper arm!
7. XHD Buckets:
   
   These can be used on any application, from digging soil to digging and
   loading rocks in a quarry. Refer also to the notes on Digging Buckets
   and Cycle Times.
8. Price. If you’ve read the
   notes above, you won’t be surprised to hear that with buckets – as with
   many things in life – the cheapest is rarely the best choice. We’ve all
   seen the sob stories, in the papers, on the TV (on shows like Watchdog)
   of people who’ve employed the cheapest builder, or gone on the cheapest
   holiday, had the cheapest double-glazing fitted, and ultimately, cheap
   buckets are just the same – the only good thing about them is the price.
   See Specification to find out why.
9. Specification. Once you’ve decided the type of bucket you need – Digging, Ditching, XHD etc.
   – what you really need to know is the specification, in order to make a
   true comparison of what you’re getting for your money. Unfortunately,
   not all bucket manufacturers are as honest and forthcoming with this
   data, and for good reason too. These are the key criteria:
10. Manufacture Time:
    
    We always try to sell customers the right bucket/attachment for their
    job, rather than just using the ‘let’s shift what we have in stock’
    approach. Often we have stock of the right kit, but equally there are
    times where we need to manufacture to customers requirements. In this
    case, we will tell you an accurate build date, at the time of order, and
    we will stick to it. As a rough guide, we can normally guarantee the
    lead times for buckets that are declared on the product page.
    
    For more information: https://digbits.co.uk/pages/buckets-buying-and-using

Every single bucket we sell, from the very smallest, to the largest, is hand built in our own works here in Rugeley, Staffordshrie, United Kingdom.

A potential elephant trap. Everyone thinks they have a 'standard' hitch, until they get a bucket which does not fit.

The truth is more complex; the majority of excavator quick hitches and couplers are not fitted at the OEM factory, but by the dealer or even end user.

CAUTION! If you buy buckets that don't match your hitch, there's a very significant safety risk.

Always double check the basic dimensions of the buckets your machine uses. Never assume they are 'standard'.

It is much cheaper and much quicker for you to measure twice, and for us to only weld once!
Most of the time, you're in a rush when you're buying for a job start,
but a few minutes checking makes sure you hit the ground running as soon
as the new kit arrives

We currently ship to England, Wales and Scotland. Deliveries to Scottish areas north of Edinburgh and Glasgow will be on longer deliver time.

Standard shipping normally takes 1-2 days from dispatch.

Shipping to islands, to parts of Mid Wales and areas in Scotland north of Edinburgh and Glasgow will take 3-5 days.

For stock buckets, we can usually dispatch on the day of order, Mon to Fri, for orders by 3pm. Other buckets, the manufacturing lead times are shown. Feel free to call and check availability before ordering.

Items must be returned within 14 days after receiving your order. Items must be returned in the same condition in which they were received, be unworn/unused, have any tags still attached, and include all the original packaging.

Refunds are processed within 7 days from when we receive the item(s).